mixer design is for Pre-mixing normal Powder Coating with detachable
container from the mixing head. The mixer head and containers used for pre-mixing are
manufactured with flanged top; internal surfaces manufactured from stainless steel AISI
304 with fine polished finish. The discharge from the container is via large diameter
butterfly valve.
The container is fitted into a fabricated trolley that allows the container to be positioned
under the mixer head guides and raised and clamped into position by two worm screw
jacks operated by geared motors with built in safety proximity switches.
Quantity: | |
---|---|
operational sequence would be as follows:
1. SET selector switch to AUTO position
2. LOAD portable container into machine
3. CHECK main switch is ON (I=ON)
4. CHECK e-stops are released (One on panel, Four on machine)
5. CHECK pilot lamp is ON (Safe operation indication)
6. CHECK key switch is ON (For normal operation)
7. SET the mixing timer (Mixing time)
8. SELECT the portable container up switch
9. START of the cycle (Continuous siren during operation)
• Lifting of portable container
• Rotation 1800up to the mixing position
• Mixing operation for pre-set time
• Rotation down to material levelling position
• Start for cleaning rotor
• Rotation down to lower portable container
• Portable container down for dust extraction
• Lowering of portable container
10. END of cycle(Continuous siren stops)
11. UNLOAD portable container from machine