English  |
TSX
TOPSUN
8477
| Quantity: | |
|---|---|
| 15:1, 20:1 and 25:1 L/D barrel lengths Top opening barrel provides easy access for cleaning and maintenance High Free Volume design processes a wide range of product types Accurate and responsive temperature control Stainless steel covers for safety and appearance |
Flexible screw configuration allows a wide range of materials and processes to
be handled
Pre-assembled screws and shafts lift out for easy cleaning and quick changeover
Splined agitator shafts distribute torque and improve reliability
New improved discharge guard
Castor mounted base design
Fully integrated powder coating process system to suit research and small
batch production
Chill knife end discharge - fully self wiping and with no product hold up
Choice of single screw feeders with either a rigid or flexible hopper
Mounted on swivel plate to permit offline cleaning
Fully integrated control system (feeder, extruder, chill roll)
Plug and socket connections - no site wiring
Simple pushbutton interface mounted on swivel pendant for
improved operator access
cassette moving out
Tool free clean down procedure
Simple removable belt cassette design
maintains intimate product contact with
roll for effective cooling
Fully integrated fixed speed flaking unit
Adjustable nip gap and variable speed rolls
Tool free belt changeover
Stainless steel construction
● Typical outputs 70 kg/hr @ 600 rpm
● Typical outputs 100 kg/hr @ 1000 rpm
● Maximum operating temperature 200°C
● Approximate weight 1000 kg
● Main 32A 380/415V 3 Phase plus neutral and earth
● Control 24V DC
● Extruder requires 1600 lt/hr mains water @ 15°C
and 4 bar
● Chill roll requires 1600 lt/hr chilled water @ 4°C
and 4 bar
| 15:1, 20:1 and 25:1 L/D barrel lengths Top opening barrel provides easy access for cleaning and maintenance High Free Volume design processes a wide range of product types Accurate and responsive temperature control Stainless steel covers for safety and appearance |
Flexible screw configuration allows a wide range of materials and processes to
be handled
Pre-assembled screws and shafts lift out for easy cleaning and quick changeover
Splined agitator shafts distribute torque and improve reliability
New improved discharge guard
Castor mounted base design
Fully integrated powder coating process system to suit research and small
batch production
Chill knife end discharge - fully self wiping and with no product hold up
Choice of single screw feeders with either a rigid or flexible hopper
Mounted on swivel plate to permit offline cleaning
Fully integrated control system (feeder, extruder, chill roll)
Plug and socket connections - no site wiring
Simple pushbutton interface mounted on swivel pendant for
improved operator access
cassette moving out
Tool free clean down procedure
Simple removable belt cassette design
maintains intimate product contact with
roll for effective cooling
Fully integrated fixed speed flaking unit
Adjustable nip gap and variable speed rolls
Tool free belt changeover
Stainless steel construction
● Typical outputs 70 kg/hr @ 600 rpm
● Typical outputs 100 kg/hr @ 1000 rpm
● Maximum operating temperature 200°C
● Approximate weight 1000 kg
● Main 32A 380/415V 3 Phase plus neutral and earth
● Control 24V DC
● Extruder requires 1600 lt/hr mains water @ 15°C
and 4 bar
● Chill roll requires 1600 lt/hr chilled water @ 4°C
and 4 bar
