The production of Metallic Powder Coatings is best achieved via the Bonding process that
is relatively safe and does not leave free metal particles within the powder when correctly
bonded. The Bonding process can be described as the complete attachment of metal
pigments to thermosetting Powder Coatings. The problems associated with separation and
agglomeration will disappear with reclaim equal to normal non-metallic powder coatings.
The metallic effect will be constant even with large batches.
The risks of incorporating the pigments, especially Aluminium. Can be eliminated by
determining a basis of safe operation for the process and using the best equipment for
Use for reference of latest bonging technology, the bonding equipment we produce is easy to
Advanced design of cooling system to the mixing blades, bonding container and cooling container
to avoid the solidify of particles during warming process.
Automatic control for bonding process, including oxygen monitor, warming, bonding, cooling and
304 stainless steel are used for the container inner wall, blade and discharge outlet, and the
surface is mirror polished. Less sticky material during production.
Multilevel construction design for bonding container blade with good cleaning. The angle and
height of baffled can be adjusted to make sure the material temperature difference is small during
High efficiency and effect.
The whole processing is controlled by intelligent estimate and control system. Material
temperature can be controlled precisely. The temperature during boding process can be controlled ±
HMI friendly for operating, running parameters setting, display, transmission by internet and