English  |
GDY
TOPSUN
8477
| Quantity: | |
|---|---|
The molten extrusion discharged from the extruder falls into the gap of the cooling roller and is squeezed into 1-2mm thick film, and finally falls into the gathering box. The thickness of flakes can be adjusted by the adjusted device at the back belt.Then, the extrusion will be transmitted onto the belt with continuously cooled, the thesurface temperature of cooling belt is controlled by the chilled water about 10 ℃ , whioch is emitted from the spray nozzle devices in a form of cylindrical ф300. The cooled sheet material will enter into the crushing system, there the irregular flake will be formed. They will be gathered into the material cart.
The molten extrusion discharged from the extruder falls into the gap of the cooling roller and is squeezed into 1-2mm thick film, and finally falls into the gathering box. The thickness of flakes can be adjusted by the adjusted device at the back belt.Then, the extrusion will be transmitted onto the belt with continuously cooled, the thesurface temperature of cooling belt is controlled by the chilled water about 10 ℃ , whioch is emitted from the spray nozzle devices in a form of cylindrical ф300. The cooled sheet material will enter into the crushing system, there the irregular flake will be formed. They will be gathered into the material cart.
