Making Air Pvc High Speed PU Compact Type Cooling Belt

1.after inputting power, insulation   switch can not supply the power

1.voltage is too low; voltage is not   enough and is in an auto segregated protective state.

Power voltage is tested and is within   the range of 400v±10%, and when in operation, restart to supply power.

2.general control contactor can not be   closed and safe relay yellow light is in a flash condition

2.safe switch of rollers protective   cover and crushing cover are closed to the right position or not, after confirmation,   restart to supply the power and safe relay green light is on and general   control contactor can be closed.

3.rollers are jammed and inverter is   off power instantly.

3.squeezing motors is overloaded, main   and minor rollers squeezing too much and cause overloading and jammed   problem, so the protective device of the inverter is off power.

Adjusting the roller-shifting device   to solve this problem.

4. Conveyor belt is deflected

Adjusting the conveyor belt shifting   device and correct the position.

 (Shifting device position, please see the  Assemble diagram-I)