content is empty!
⊃2; Periodicly inspect the scraper of the roller and the belt. Because of
the friction, so adjust the gap between the belt and the scrapers; if
needed, replace the scraper regularly.
⊃2; Regularly inspect the water spatula under the belt, If necessary, just
adjust or replace.
⊃2; Regularly supply lubrication to the reducer and motor bearing.
check the main spare part instruction. Check the main specifications
of the fittings - worm gear reducer part (16th page), lubricants part.
- ABB Motor Manual Instructions (5th page), Seventh part of the
maintenance and lubrication.
⊃2; Regularly check the water filters, clean up debris in time or replace
the filters.
⊃2; Regularly check the sealed point of rotary joint, clean up the debris
and scale in time.
⊃2; Periodicly inspect if the plate heat exchanger is clean.
⊃2; Regularly blow clean the equipment surface and controlling cabinet
by the compressed air.
⊃2; The maintenance of the key parts, please refer to the overhaul time
table.